Kawasaki Sander 840457 User Manual

MODEL  
840457  
19.2V CORDLESS WAXER / POLISHER  
INSTRUCTION MANUAL  
BATTERIES AND  
CHARGERS  
SOLD SEPARATELY  
Conforms to UL STD 60745-1,  
60745-2-4  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,  
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND  
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO  
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE  
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE  
DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION  
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE  
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE  
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM.  
YOUR FEEDBACK IS VITAL TO US.  
87-1904-60957  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP.,  
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT.  
CONSUMER INQUIRES SHOULD BE DIRECTED TO:  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
1-800-590-3723  
LONG BEACH, CA 90810-1462 USA  
840457 –19.2V Cordless Waxer/Polisher_Rev 7/14/07  
Printed in China  
 
WORK AREA  
WARNING  
indicates a potentially hazardous  
situation which, if not avoided, could result in  
death or serious injury.  
Keep your work area clean and well lit.  
invite accidents.  
Cluttered benches and dark areas  
CAUTION  
indicates a potentially hazardous  
situation which, if not avoided, may result in  
minor or moderate injury.  
Do not operate power tools in explosive atmospheres, such as in the pres-  
ence of flammable liquids, gases or dust.  
may ignite the dust or fumes.  
Power tools create sparks which  
CAUTION  
used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
Keep bystanders, children, and visitors away while operating a power tool.  
Distractions can cause you to lose control.  
NOTE  
provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
ELECTRICAL SAFETY  
IMPORTANT SAFEGUARDS  
Do not abuse the cord. Never use the cord to carry the tool. Keep the cord  
away from heat, oil, sharp edges, or moving parts. Replace damaged cords  
immediately.  
Damaged cords may create a fire.  
A battery operated tool with integral batteries or a separate battery pack  
must be recharged only with the specified charger for the battery.  
People with electronic devices, such as pacemakers, should consult their  
physician(s) before using this product. Operation of electrical equipment in  
close proximity to a heart pacemaker could cause interference or failure of  
the pacemaker.  
A charger  
that may be suitable for one type of battery may create a risk of fire when used with  
another battery.  
WARNING:  
Some dust created by power sanding, sawing, grinding, drilling and  
Use battery operated tool only with specifically designated battery pack.  
any other batteries may create risk of fire.  
Use of  
other construction activities contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm.  
Some examples of these chemicals are:  
• Lead from lead-based paints.  
Crystalline silica from bricks and cement and other masonry products,  
and arsenic and chromium from chemically-treated lumber.  
Your risk from these exposures varies, depending on how often you do this type  
of work. To reduce your exposure to these chemicals: work in a well ventilated  
area, and work with approved safety equipment, such as dust masks that are  
specially designed to filter out microscopic particles.  
WARNING:  
Handling the power cord on corded products may expose you to  
lead, a chemical known to the State of California to cause cancer and birth  
Wash hands after handling.  
defects or other reproductive harm.  
3
4
 
PERSONAL SAFETY  
When battery pack is not in use, keep it away from other metal objects like:  
paper clips, coins, keys, nails, screws, or other small metal objects that can  
Stay alert, watch what you are doing, and use common sense when operat-  
ing a power tool. Do not use tool while tired or under the influence of drugs,  
make a connection from one terminal to another.  
Shorting the battery termi-  
nals together may cause sparks, burns or a fire.  
alcohol or medication.  
A moment of inattention while operating power tools  
may result in serious personal injury.  
Maintain tools with care. Keep cutting tools sharp and clean  
. Properly main-  
tained tools with sharp cutting edge are less likely to bind and are easier to con-  
trol.  
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.  
Keep your hair, clothing, and gloves away from moving parts.  
Loose clothes,  
jewelry or long hair can be caught in moving parts.  
Check for misalignment or binding of moving parts, breakage of parts, and  
any other condition that may affect the tool’s operation. If damaged, have the  
Avoid accidental starting. Be sure switch is in the locked or OFF” position  
before inserting battery pack.  
tool serviced before using.  
Many accidents are caused by poorly maintained  
Carrying power tools with your finger on the  
tools.  
switch or inserting battery pack into a tool with the power switch on” invites  
accidents.  
Use only accessories that are recommended by the manufacturer for your  
model.  
Accessories that may be suitable for one tool may create a risk of injury  
when used on another tool.  
Remove adjusting keys or wrenches before turning the tool “ ON” .  
A wrench or a key that is left attached to a rotating part of the tool may result  
in personal injury.  
Do not overreach. Keep proper footing and balance at all times.  
Proper foot-  
SERVICE  
ing and balance enable better control of the tool in unexpected situations.  
Use safety equipment. Always wear eye protection.  
Dust mask, non-skid  
safety shoes, hard hat, or hearing protection must be used for appropriate  
conditions.  
Tool service must be performed only by qualified repair personnel.  
or maintenance by unqualified personnel may result in a risk of injury.  
Service  
When servicing a tool, use only identical replacement parts. Follow instruc-  
tions in the Maintenance section of this manual.  
TOOL USE AND CARE  
Use of unauthorized parts or  
failure to follow Maintenance Instructions may create a risk of shock or injury.  
Use clamps or other practical ways to secure and support the workpiece to a  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
stable platform.  
Holding the work by hand or against your body is unstable and  
may lead to loss of control.  
Hold tool by insulated gripping surfaces when per-  
forming an operation where the cutting tool may contact hidden wiring.  
Contact with a live” wire will also make exposed metal parts of the tool  
“live” and shock the operator.  
Do not force tool. Use the correct tool for your application.  
will do the job better and safer at the rate for which it is designed.  
The correct tool  
Do not use the tool if the power switch does not turn it ON” or OFF.  
A tool that  
cannot be controlled with the switch is dangerous and must be repaired.  
Disconnect battery pack from tool or place the switch in the locked or OFF”  
position before making any adjustments, changing accessories, or storing the  
tool.  
Such preventative safety measures reduce the risk of starting the tool accidentally.  
Store idle tools out of reach of children and other untrained persons.  
Tools  
are dangerous in the hands of untrained users.  
6
 
SAFETY RULES FOR THE WAXER/POLISHER  
SYMBOLS  
IMPORTANT:  
Some of the following symbols may be used on your tool. Please  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
Always wear safety goggles or eye protection when using this tool.  
Use a  
dust mask or respirator for applications which generate dust.  
SYMBOL  
NAME  
Volts  
EXPLANATION  
Voltage (Potential)  
ALWAYS hold the Cordless Waxer/Polisher with BOTH hands.  
V
A
Amperes  
Hertz  
Watt  
Kilograms  
Alternating Current  
Direct Current  
Current  
Secure the material being worked on. Never hold it in your hand or across  
your legs.  
Unstable support can cause loss of control and injury.  
Check to see that keys and adjusting wrenches are removed from the  
Hz  
W
Kg  
Frequency (Cycles per Second)  
Power  
Weight  
Type of Current  
Type of Current  
Cordless Waxer/Polisher before switching the tool ON.  
Keys or wrenches  
can fly away at high velocity striking you or a bystander.  
Keep the ventilation openings clear of dust, hair, paper or any other items  
that may restrict air flow.  
Alternating or Direct Current Type of Current  
Earthing Terminal  
Class II Construction  
Minutes  
Seconds  
Diameter  
Grounding Terminal  
Denotes Double Insulation  
Time  
Time  
Size of Drill Bits,  
Grinding Wheels, etc.  
No-load Rotational Speed  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
Speed, Torque or Position Settings  
Keep hands away from moving parts.  
Keep clothes or long hair away from spinning pad.  
min  
s
Disconnect the plug or remove the battery pack from tool and place the  
switch in the locked or OFF” position before making any assembly adjust-  
ments, changing accessories, performing any inspection, maintenance or  
cleaning procedures.  
Such preventive safety measures reduce the risk of start-  
No load speed  
Revolutions per Minute  
ing the tool accidentally.  
.../min  
Do not use the Cordless Waxer/Polisher if it has been damaged, left outdoors  
in the rain, snow, wet or damp environments, or immersed in liquid.  
1,2,3, …  
Ring Selector Settings  
Maintain labels and nameplates on the Cordless Waxer/Polisher.  
These carry  
important information. If unreadable or missing, contact Alltrade for a replacement.  
7
8
 
FUNCTIONAL DESCRIPTION  
5
Use only Kawasaki19.2V Battery Pack #691034 or  
#691240 with the One Hour Charger #690507 or Charger #690072/ Adapter  
#690074.  
4
CONTROLS AND COMPONENTS:  
1. ON/OFF Switch  
2. Form Pad  
3. Comfort Grip Handles  
4. Synthetic Wool Bonnet  
5. Terry Cloth Bonnet  
3
3
The battery is not fully charged.  
Charger #690072/ Adapter #690074 -  
Before first use, the battery pack  
requires 8-10 hours charge time to be fully charged. Subsequent recharging  
needs 3-5 hours for the battery to be fully charged.  
2
One Hour Charger #690507 -  
hours charge time to be fully charged. Subsequent recharging needs 1 hour for  
the battery to be fully charged.  
Before first use, the battery pack requires 3-5  
1
Always switch to a fresh battery when tool performance begins to diminish.  
Severe heat is most destructive to a battery; the more heat generated, the faster  
the battery loses power. A battery that gets too hot can have a shortened life.  
BATTERY  
Never over-discharge a battery by using the tool even after tool performance  
has decreased.  
Do not attempt to discharge a tool’s battery by continuing to  
Before using battery pack, please read carefully all instruc-  
tions and cautionary markings on battery pack, battery  
charger and product using battery.  
pull on the tool trigger. When tool performance begins to diminish, stop the tool  
and recharge the battery for optimal performance.  
®
Charge battery pack at ambient temperatures between 50° F – 104° F.  
Do not incinerate the battery pack even if it is severely  
Store tool and battery pack in locations where temperatures will not exceed  
damaged or is completely worn out.  
The battery pack can  
120°F.  
This is important to prevent serious damage to the battery cells.  
explode.  
The battery pack should always be recharged when the Cordless Waxer/Polisher  
begins to run slowly.  
Do not carry battery packs in aprons, pockets, or tool boxes, product kit  
boxes, drawers, etc. with loose metal objects.  
battery pack terminals could  
be short circuited causing damage to the battery pack, severe burns or fire.  
When battery pack is not in use, keep it away from other metal objects such as  
paper clips, coins, keys, nails, screws or other small metal objects that can  
The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic  
make a connection from one terminal to another.  
Shorting the battery terminals  
material by the Environmental Protection Agency.  
Before disposing of  
together may cause sparks, burns, or fire.  
damaged or worn out Ni-Cad battery packs, check with your State  
Environmental Protection Agency to find out about special restrictions on the  
disposal of these battery packs, take them to your local recycling center for  
1-800-822-8837  
proper disposal, or call  
.
9
10  
 
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet  
or damp environments, or immersed in liquid.  
REMOVING / ATTACHING BATTERY PACK  
The battery pack and charger heat during charging.  
Place the charger on a flat,  
non-flammable surface away from flammable materials with at least four inches of  
clearance to allow proper air circulation around the charger and battery pack.  
When the battery pack requires recharging, a 3-5 hours charge allows the tool to  
operate at full power.  
A charging indicator light on the charger will illuminate to  
show that charging is taking place.  
RELEASE  
BUTTON  
CHARGING BATTERY PACK USING CHARGER #690072 / ADAPTER #690074  
BATTERY PACK  
CHARGE BATTERY PACK:  
1. Make sure the trigger on the  
Cordless Waxer/Polisher is  
REMOVE BATTERY PACK:  
1. Press both release buttons on either side of the Cordless Waxer/Polisher to  
release the battery pack.  
120V AC  
ADAPTER  
OFF”  
in the  
position and  
remove the battery pack  
from the Cordless  
Waxer/Polisher.  
2. Pull battery pack free of Cordless Waxer/Polisher.  
ATTACH BATTERY PACK:  
LED LIGHT  
1. Align the raised portion of the battery pack with the groove in the battery  
compartment of the Cordless Waxer/Polisher.  
2. Insert the battery pack into  
the charger. Be sure that the  
battery pack is fully seated  
in the charger. Do not force.  
2. Press the battery pack into place. Make sure the latches are securely fastened.  
Do not use the Cordless Waxer/Polisher if the battery pack is not seated  
properly.  
BATTERY  
CHARGER  
3. Plug the charger into the  
nearest 120 volt, electrical  
outlet. The indicator light will come  
CHARGER #690072 / ADAPTER #690074  
ON”  
.
IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES  
Before using battery charger, please read carefully all  
instructions and cautionary markings on battery charger, battery pack and  
product using battery.  
When using your Cordless Waxer/Polisher continuously, the batteries in your bat-  
tery pack will become hot. You should let a hot battery pack cool down for approx-  
imately 30 minutes before attempting to recharge. When the battery pack becomes  
discharged and is hot, the red light on the charger will flash. When the battery pack  
cools down, the red light will glow continuously.  
The charger will not automatically turn OFF” when the  
battery pack is fully charged. The charging indicator light will remain ON”  
until the charger is disconnected from the electrical outlet. To prolong  
battery life, REMOVE battery from charger after 3-5 hours of recharging.  
This will occur when continuous use of your Cordless  
Waxer/Polisher causes the battery pack to become hot.  
It does not occur  
under normal circumstances.  
Use only the charger which accompanied your product or direct replacement as  
listed in this manual.  
Do not substitute any other charger. Use only Alltrade  
approved chargers with your product.  
Do not disassemble charger.  
11  
12  
 
4. After approximately one hour of charging, the red indicator light should go  
OFF” ON”  
ONE HOUR CHARGER #690507  
and the green light should come  
battery is fully charged.  
. The green light indicates that the  
Before using battery charger, please read carefully all  
instructions and cautionary markings on battery charger, battery pack and  
product using battery.  
5. When fully charged, reattach battery pack onto Cordless Waxer/Polisher, making  
certain latches fasten securely. Cordless Waxer/Polisher will not operate properly  
if the battery pack is not seated properly.  
Use only the charger which accompanied your product or direct replacement as  
listed in this manual.  
Do not substitute any other charger. Use only Alltrade  
OPERATING THE WAXER/POLISHER  
approved chargers with your product.  
Do not disassemble charger.  
Be aware that this tool is always in an operating condition  
because it does not have to be plugged into an electrical outlet. Always turn the  
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet  
or damp environments, or immersed in liquid.  
OFF”  
switch  
and remove the battery pack before changing bonnets or  
servicing.  
The battery pack and charger heat during charging.  
Place the charger on a flat,  
non-flammable surface away from flammable materials with at least four inches of  
clearance to allow proper air circulation around the charger and battery pack.  
BEFORE USE:  
• Make sure the car is  
clean. Wash thoroughly  
to remove all dirt and  
road film. Waxing a dirty  
car will scratch the car’s  
finish.  
When the battery pack requires recharging, a 1 hour charge allows the tool to  
operate at full power.  
A charging indicator light on the charger will illuminate to  
show that charging is taking place.  
CHARGING BATTERY PACK USING ONE HOUR CHARGER #690507  
Remove the battery  
pack to prevent acciden-  
tal starting.  
BATTERY PACK  
CHARGE BATTERY PACK:  
1. Plug the charger into the nearest  
120 volt electrical outlet. The  
step of the battery has positive  
and negative terminal markings  
on it. Align the markings with  
the identical markings on the top  
of the charger base. Insert the  
battery pack into base. Pack will  
not insert properly if reversed.  
Turn the waxer upside-  
down with the foam pad  
facing up.  
Slip the synthetic wool bonnet over the foam pad. Tuck the elastic down evenly  
around the pad so the bonnet will not come off while in use.  
2. Make sure the trigger on the  
Cordless Waxer/Polisher is in the  
OFF”  
position and remove the  
BATTERY  
CHARGER  
battery pack from the Cordless  
Waxer/Polisher.  
ON”  
3. If, when first inserting the battery pack, the red  
press the SET” button on the charger. When the battery is charging, the red  
ON”  
button does not light up,  
light is  
.
13  
14  
 
WAXING  
MAINTENANCE AND CLEANING  
Always remove the battery pack before attempting  
The bonnet will absorb the wax as you work. Reapply as  
cleaning or maintenance.  
necessary.  
Do not use paint thinner or any other chemicals to clean the waxer/polisher case.  
Harsh solvents may damage the plastic. Use only mild soap and water for cleaning.  
Never apply wax in direct  
sunlight.  
Clean vents frequently. Keep clear of all dirt and obstructions.  
Wash and dry vehicle before  
waxing.  
Wash bonnets in warm soapy water. Do not use harsh detergents. Air dry complete-  
ly before use.  
• Make sure you have a firm grip  
on the waxer/polisher before  
Worn bonnets may be replaced with any standard 7-8" bonnet.  
ON  
switching power  
.
ACCESSORIES  
NEVER  
press down on the  
waxer/polisher. Move over the  
surface with light, sweeping  
strokes.  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may become hazardous when used on  
another tool.  
Using a crisscross pattern,  
work your way across the broad, flat surfaces of the car first. Move across the  
hood, over the roof, down the trunk and around the sides.  
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.  
If you must use an extension cord, be sure that the gauge is large enough to carry  
the amount of current necessary for your power tool.  
If not, your tool may  
experience a loss of power, excessive voltage drop or overheating. The smaller the  
gauge number, the heavier the cord (see table on next page).  
POLISHING  
Slip the terry cloth  
bonnet over the foam  
pad, making sure that  
the elastic is securely  
tucked around the  
pad.  
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS  
TOOL CURRENT RATING  
CONDUCTOR SIZE IN A.W.G  
AMPERE  
3-6  
6-8  
8-10  
10-12  
12-16  
16-20  
10FT.  
18  
18  
18  
16  
25FT.  
18  
18  
18  
16  
50FT.  
18  
18  
18  
14  
100FT.  
18  
16  
14  
14  
-
Polish surfaces in the  
same order that you  
waxed them.  
14  
12  
12  
12  
12  
12  
-
Hard-to-reach areas  
can be polished by  
hand. Slip the bonnet  
over your fingers and  
polish in small circles,  
working your way around door handles or under edges.  
15  
16  
 
PURPOSES OR ON A JOBSITE  
is not covered under this warranty.  
SPECIFICATIONS  
SPECIFICATIONS  
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
component thereof is modified, altered or used for any commercial purpose or on  
a jobsite. This warranty does not apply to any other product and/or component  
thereof manufactured or distributed by Alltrade, and does not apply to products  
and/or components thereof designed, manufactured and/or assembled by others,  
Voltage  
19.2V  
3300 RPM  
7"  
No Load Speed  
Pad Size  
Battery Type  
Ni-Cad  
THERE ARE NO WARRANTIES  
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.  
for which Alltrade makes no warranties whatsoever.  
PROTECTING THE ENVIRONMENT  
BATTERIES  
Warranty Performance  
Alltrade batteries can be recharged many times. At the end of their useful life, recy-  
cle batteries with due care for our environment.  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
found to be defective and subject to warranty. Alltrade retains the sole discretion  
to determine whether any item or part is nonconforming and, if so, whether the  
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center  
1-800-822-8837  
. Collected batteries will be recycled or disposed of properly.  
or call  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
Angle Grinders  
Reciprocating Saws  
Routers  
Jigsaws  
Rotary Tools  
Circular Saws  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
2 YEAR LIMITED HOME USE WARRANTY  
Express and Exclusive Limited Home Use Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI™ portable power tool and no one else  
all parts of the product (except those parts referred to below which are specifically  
excluded from such warranty (see Exclusions)) to be free from defects in materials  
and workmanship for a period of two years from original date of purchase.  
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS:  
Kawasaki™ portable power tool is offered as a home use tool and carries a  
This  
HOME  
USE WARRANTY  
.
This tool is made for home use in the execution of  
COMMERCIAL  
projects and repairs in and around the home. Use of the tool for  
18  
 
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASERS SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
Exclusions  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADES AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
Warranty Disclaimers  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department toll free at 1-800-590-3723 for general repair information and charges.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
19  
20  
 

Insignia CRT Television IS TV040917 User Manual
Insignia DVD Player NS BDLIVE01 User Manual
Insignia Flat Panel Television NS LCD19W 09 User Manual
Intel Personal Computer TS ASP3 User Manual
Intel Video Gaming Accessories 273838 001 User Manual
iSimple Indoor Furnishings PGHHY1 User Manual
Jenn Air Ventilation Hood LI3U2B User Manual
JL Audio Car Speaker SB POL RNGR SYS User Manual
JVC Stereo System CA HXZ9 User Manual
KitchenAid Double Oven 3182137 User Manual