Kawasaki Impact Driver 840223 User Manual

COMPONENT  
#691176  
19.2V BATTERY-OPERATED  
IMPACT WRENCH  
INSTRUCTION MANUAL  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,  
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND  
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO  
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE  
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE  
DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION  
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE  
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE  
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM.  
YOUR FEEDBACK IS VITAL TO US.  
87-1904-60957  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP.,  
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT.  
CONSUMER INQUIRES SHOULD BE DIRECTED TO:  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
1-800-590-3723  
LONG BEACH, CA 90810-1462 USA  
Printed in China  
691176 –19.2V Cordless Impact Wrench_Rev 3/26/07  
 
WORK AREA  
CAUTION  
indicates a potentially hazardous  
situation which, if not avoided, may result in  
minor or moderate injury.  
Keep your work area clean and well lit.  
invite accidents.  
Cluttered benches and dark areas  
CAUTION  
used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
Do not operate power tools in explosive atmospheres, such as in the pres-  
ence of flammable liquids, gases or dust.  
may ignite the dust or fumes.  
Power tools create sparks which  
NOTE  
provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
Keep bystanders, children, and visitors away while operating a power tool.  
Distractions can cause you to lose control.  
IMPORTANT SAFEGUARDS  
ELECTRICAL SAFETY  
People with electronic devices, such as pacemakers, should consult their  
physician(s) before using this product. Operation of electrical equipment in  
close proximity to a heart pacemaker could cause interference or failure of  
the pacemaker.  
Do not abuse the cord. Never use the cord to carry the tool. Keep the cord  
away from heat, oil, sharrp edges, or moving parts. Replace damaged cords  
immediately.  
Damaged cords may create a fire.  
A battery operated tool with integral batteries or a separate battery pack  
must be recharged only with the specified charger for the battery.  
WARNING:  
Some dust created by power sanding, sawing, grinding, drilling and  
other construction activities contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm.  
A charger  
that may be suitable for one type of battery may create a risk of fire when used with  
another battery.  
Some examples of these chemicals are:  
• Lead from lead-based paints.  
Use battery operated tool only with specifically designated battery pack.  
any other batteries may create risk of fire.  
Use of  
Crystalline silica from bricks and cement and other masonry products,  
and arsenic and chromium from chemically-treated lumber.  
Your risk from these exposures varies, depending on how often you do this type  
of work. To reduce your exposure to these chemicals: work in a well ventilated  
area, and work with approved safety equipment, such as dust masks that are  
specially designed to filter out microscopic particles.  
WARNING:  
Handling the power cord on this product may expose you to lead, a  
chemical known to the State of California to cause cancer and birth defects or  
Wash hands after handling.  
other reproductive harm.  
3
4
 
PERSONAL SAFETY  
When battery pack is not in use, keep it away from other metal objects like:  
paper clips, coins, keys, nails, screws, or other small metal objects that can  
Stay alert, watch what you are doing, and use common sense when operat-  
ing a power tool. Do not use tool while tired or under the influence of drugs,  
make a connection from one terminal to another.  
nals together may cause sparks, burns or a fire.  
Shorting the battery termi-  
alcohol or medication.  
A moment of inattention while operating power tools  
Maintain tools with care. Keep cutting tools sharp and clean  
. Properly maintained  
may result in serious personal injury.  
tools with sharp cutting edge are less likely to bind and are easier to control.  
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.  
Keep your hair, clothing, and gloves away from moving parts.  
jewelry or long hair can be caught in moving parts.  
Loose clothes,  
Check for misalignment or binding of moving parts, breakage of parts, and any  
other condition that may affect the tool’s operation. If damaged, have the tool  
serviced before using.  
Many accidents are caused by poorly maintained tools.  
Use only accessories that are recommended by the manufacturer for your  
model.  
Avoid accidental starting. Be sure switch is in the locked or OFF” position  
before inserting battery pack.  
Carrying power tools with your finger on the  
ON”  
switch or inserting battery pack into a tool with the power switch  
accidents.  
invites  
Accessories that may be suitable for one tool may create a risk of injury  
when used on another tool.  
Remove adjusting keys or wrenches before turning the tool ON.  
or a key that is left attached to a rotating part of the tool may result in person-  
al injury.  
A wrench  
SERVICE  
Tool service must be performed only by qualified repair personnel.  
maintenance by unqualified personnel may result in a risk of injury.  
Service or  
Do not overreach. Keep proper footing and balance at all times.  
Proper foot-  
ing and balance enable better control of the tool in unexpected situations.  
Use safety equipment. Always wear eye protection.  
When servicing a tool, use only identical replacement parts. Follow instructions  
in the Maintenance section of this manual.  
Use of unauthorized parts or failure to  
Dust mask, non-skid safe-  
follow Maintenance Instructions may create a risk of shock or injury.  
ty shoes, hard hat, or hearing protection must be used for appropriate conditions.  
TOOL USE AND CARE  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
Hold tool by insulated gripping surfaces when perform-  
Use clamps or other practical ways to secure and support the workpiece to a  
ing an operation where the cutting tool may contact hidden wiring.  
Contact  
stable platform.  
may lead to loss of control.  
Holding the work by hand or against your body is unstable and  
with a “live” wire will also make exposed metal parts of the tool live” and shock  
the operator.  
Do not force tool. Use the correct tool for your application.  
will do the job better and safer at the rate for which it is designed.  
The correct tool  
SAFETY RULES FOR IMPACT WRENCHES  
Do not use the tool if the power switch does not turn it ON” or OFF.  
cannot be controlled with the switch is dangerous and must be repaired.  
A tool that  
Always wear safety goggles or eye protection when using this tool.  
dust mask or respirator for applications which generate dust.  
Use a  
Disconnect battery pack from tool or place the switch in the locked or OFF” posi-  
tion before making any adjustments, changing accessories, or storing the tool.  
Such preventative safety measures reduce the risk of starting the tool accidentally.  
Do not grasp the tool or place your hands too close to the spinning chuck or  
drill bit.  
Your hand may be lacerated or may cause injury.  
Secure the material being worked on. Never hold it in your hand or across  
your legs.  
Store idle tools out of reach of children and other untrained persons.  
are dangerous in the hands of untrained users.  
Tools  
Unstable support can cause loss of control and injury.  
5
 
SYMBOLS  
Position yourself to avoid being caught between the tool or side handle and  
walls or posts.  
tion torque of the tool could crush your hand or leg.  
IMPORTANT:  
Some of the following symbols may be used on your tool. Please  
Should the socket or bit become bound in the work, the reac-  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
Check to see that keys and adjusting wrenches are removed from the  
SYMBOL  
V
NAME  
Volts  
Amperes  
Hertz  
Watt  
Kilograms  
Alternating Current  
Direct Current  
EXPLANATION  
Voltage (Potential)  
Current  
Frequency (Cycles per Second)  
Power  
Weight  
Type of Current  
Type of Current  
Cordless Impact Wrench before switchingg the tool “ON.  
can fly away at high velocity striking you or a bystander.  
Keys or wrenches  
A
When using the Cordless Impact Wrench, always maintain a firm grip on the  
tool witth both hands.  
Hz  
W
Kg  
Hold tool by insulated gripping surfaces when performing an operation  
where the cutting tool may contact hidden wiring.  
Contact with a "live" wire  
will also make exposed metal parts of the tool "live" and shock the operator.  
Keep the handle of the Cordless Impact Wrench dry, clean, and free from oil  
and grease.  
Alternating or Direct Current Type of Current  
Earthing Terminal  
Class II Construction  
Minutes  
Seconds  
Diameter  
Grounding Terminal  
Denotes Double Insulation  
Time  
Time  
Size of Drill Bits,  
Do not run the Cordless Impact Wrench while carrying it at your side.  
ning socket or bit could become entangled with clothing and injury may result.  
A spin-  
min  
s
Disconnect the plug or remove the battery pack from tool and place the switch  
in the locked or OFF” position before making any assembly adjustments,  
changing accessories, performing any inspection, mainttenance or cleaning  
Grinding Wheels, etc.  
procedures.  
Such preventive safety measures reduce the risk of starting the  
tool accidentally.  
No load speed  
No-load Rotational Speed  
.../min  
Revolutions per Minute  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
Do not use the Cordless Impact Wrench if it has been damaged, left outdoors  
in the rain, snow, wet or damp environments, or immersed in liquid.  
1,2,3, …  
Ring Selector Settings  
Speed, Torque or Position Settings  
Maintain labels and nameplates on the Cordless Impact Wrench.  
These carry  
important information. If unreadable or missing, contact Alltrade for a replace-  
ment.  
8
 
FUNCTIONAL DESCRIPTION  
BATTERY  
3
7
11  
Before using battery pack, please read carefully all instruc-  
tions and cautionary markings on battery pack, battery  
charger and product using battery.  
5
®
2
Do not incinerate the battery pack even if it is severely dam-  
1
aged or is completely worn out.  
The battery pack can explode.  
Do not carry battery packs in aprons, pockets, or tool  
boxes, product kit boxes, drawers, etc. with loose metal objects.  
8
Battery  
9
pack terminals could be short circuited causing damage to the battery pack,  
severe burns or fire.  
6
The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic  
material by the Environmental Protection Agency.  
Before disposing of dam-  
10  
4
aged or worn out Ni-Cad battery packs, check with your State Environmental  
Protection Agency to find out about special restrictions on the disposal of these  
battery packs, take them to your local recycling center for proper disposal, or  
CONTROLS AND COMPONENTS:  
1. Variable Speed Trigger Switch  
1-800-822-8837  
call  
.
7. Anvil  
8. Comfort Rubber Grip  
9. Battery Pack  
10. 120V DC Adapter  
ACCESSORIES:  
2. Forward/Reverse and  
Trigger Lock Lever  
3. Gear Enclosure  
4. Release Buttons on Each Side  
5. Charger  
The battery is not fully charged.  
8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5  
hours for the battery to be fully charged.  
Before first use, the battery pack requires  
11. 1/2" Drive Impact Socket (4)  
Always switch to a fresh battery when tool performance begins to diminish.  
Severe heat is most destructive to a battery; the more heat generated, the faster  
the battery loses power. A battery that gets too hot can have a shortened life.  
6. LED Charging Indicator  
Never over-discharge a battery by using the tool even after tool performance  
COMPONENT  
BATTERY PACK  
120V AC ADAPTER  
CHARGER  
MODEL NUMBER  
has decreased.  
Do not attempt to discharge a tool’s battery by continuing to  
690071  
690074  
690072  
pull on the tool trigger. When tool performance begins to diminish, stop the tool  
and recharge the battery for optimal performance.  
Charge battery pack at ambient temperatures between 50° F – 104° F.  
Store tool and battery pack in locations where temperatures will not exceed  
120°F.  
This is important to prevent serious damage to the battery cells.  
The battery pack should always be recharged when the Cordless Impact Wrench  
begins to run slowly.  
When battery pack is not in use, keep it away from other metal objects such as  
paper clips, coins, keys, nails, screws or other small metal objects that can  
make a connection from one terminal to another.  
Shorting the battery terminals  
together may cause sparks, burns, or fire.  
9
10  
 
REMOVING / ATTACHING BATTERY PACK  
REMOVE BATTERY PACK:  
1. Press both release buttons on  
either side of the Impact Wrench to  
release the battery pack.  
CHARGING BATTERY PACK  
BATTERY PACK  
CHARGE BATTERY PACK:  
1. Make sure the trigger on  
the Cordless Impact  
OFF”  
Wrench is in the  
120V AC  
ADAPTER  
position and remove the  
battery pack from the  
Impact Wrench.  
2. Pull battery pack free of Impact  
Wrench.  
ATTACH BATTERY PACK:  
1. Align the raised portion of the bat-  
tery pack with the groove in the  
battery compartment of the Impact  
Wrench.  
2. Insert the battery pack into the  
charger. Be sure that the battery  
pack is fully seated in the charg-  
er. Do not force.  
LED LIGHT  
3. Plug the charger into the nearest  
120 volt, electrical outlet. The  
2. Press the battery pack into place.  
Make sure the latches are securely  
fastened. Do not use the Impact  
Wrench if the battery pack is not  
seated properly.  
RELEASE  
BUTTON  
BATTERY  
CHARGER  
ON”  
indicator light will come  
.
IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES  
When using your Cordless Impact Wrench continuously, the batteries in your bat-  
tery pack will become hot. You should let a hot battery pack cool down for approx-  
imately 30 minutes before attempting to recharge. When the battery pack becomes  
discharged and is hot, the red light on the charger will flash. When the battery pack  
cools down, the red light will glow continuously.  
CHARGER  
Before using battery charger, please read carefully all  
instructions and cautionary markings on battery charger, battery pack and  
product using battery.  
This will occur when continuous use of your Cordless  
Impact Wrench causes the battery pack to become hot.  
under normal circumstances.  
It does not occur  
The charger will not automatically turn OFF” when the  
battery pack is fully charged.  
ON”  
The charging indicator light will remain  
until the charger is disconnected from the electrical outlet.  
ASSEMBLY  
Use only the charger which accompanied your product or direct replacement as  
listed in this manual.  
approved chargers with your product.  
Be aware that this tool is always in an operating condi-  
tion because it does not have to be plugged into an electrical outlet.  
Do not substitute any other charger. Use only Alltrade  
Always  
and remove the battery pack before changing bits.  
OFF”  
turn the switch  
Do not disassemble charger.  
Do not use charger if it has been damaged, left outdoors in the rain, snow, wet  
or damp environments, or immersed in liquid.  
The battery pack and charger heat during charging.  
Place the charger on a flat,  
non-flammable surface away from flammable materials with at least four inches of  
clearance to allow proper air circulation around the charger and battery pack.  
When the battery pack requires recharging, a 3-5 hour charge allows the tool to  
operate at full power.  
A charging indicator light on the charger will illuminate to  
show that charging is taking place.  
12  
 
INSTALLING / REMOVING SOCKET ON THE ANVIL  
FORWARD / REVERSE AND TRIGGER LOCK LEVER  
When removing the socket or bit from the tool, avoid  
contact with skin and use proper protective gloves when grasping the socket,  
Be sure the trigger is released when changing the position of the lever.  
bit or accessory.  
Accessories may be hot after prolonged use.  
LOCKED/OFF”  
Always store the tool in the  
position.  
Always check the direction of the Cordless Impact Wrench's rotation before use.  
TO SELECT THE DIRECTIONS  
OF ROTATION:  
To select forward Cordless  
Impact Wrench rotation, press  
the trigger lock from left to  
right flat against the Cordless  
When installing a socket, align the  
holes in the side of the socket with the  
TRIGGER  
dent pin.  
Press the socket on until the  
Reverse Lock Forward  
Impact Wrench body.  
LOCK  
dent pin engages in the hole. To remove a  
socket, depress the dent pin through the  
hole using a small pointed object and pull  
the socket off.  
To select reverse, press the  
trigger lock lever in the oppo-  
site direction.  
The center position locks the  
tool.  
OPERATING THE IMPACT WRENCH  
MAINTENANCE AND CLEANING  
Never tape the trigger switch down to provide continuous  
high speed.  
The tool may fail under such conditions causing fire or  
Always remove the battery pack before attempting  
personal injury.  
cleaning or maintenance.  
VARIABLE SPEED TRIGGER SWITCH  
THIS TOOL IS CONTROLLED  
BY A TRIGGER SWITCH:  
This Cordless Impact Wrench is lubricated before it  
This lubrication should last for the life of the tool. No  
leaves the factory.  
The speed of the Cordless Impact  
Wrench depends on the amount of  
pressure you put on the trigger.  
further lubrication is required.  
Use only mild soap and a damp cloth to clean the tool.  
inside the casing. Never immerse any part of the tool in a liquid. Always keep the  
ventilation openings clear.  
Never let any liquid get  
The more pressure you apply, the  
faster the Cordless Impact  
Wrench will go.  
TRIGGER  
SWITCH  
Always clean the battery pack using only a dry cloth. Do not use liquids.  
Always unplug the charger before cleaning it.  
Release the pressure and the  
Cordless Impact Wrench will slow  
down.  
Regularly clean the ventilation slots in your tool and charger using only a soft  
brush or dry cloth.  
Never open the Cordless Impact Wrench case, battery pack or charger.  
Do not  
attempt to repair the Cordless Impact Wrench, battery pack or charger yourself.  
Opening any of these parts will void your warranty.  
13  
14  
 
ACCESSORIES  
PROTECTING THE ENVIRONMENT  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may become hazardous when used on  
another tool.  
BATTERIES  
Alltrade batteries can be recharged many times. At the end of their useful life, recy-  
cle batteries with due care for our environment.  
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.  
Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center  
1-800-822-8837  
. Collected batteries will be recycled or disposed of properly.  
or call  
If you must use an extension cord, be suree that the gauge is large enough to carry  
the amount of current necessary for your power tool.  
If not, your tool may  
experience a loss of power, excessive voltage drop or overheating. The smaller the  
gauge number, the heavier the cord (see table below).  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS  
TOOL CURRENT RATING  
CONDUCTOR SIZE IN A.W.G  
AMPERE  
3-6  
6-8  
8-10  
10-12  
12-16  
16-20  
10FT.  
18  
18  
18  
16  
25FT.  
18  
18  
18  
16  
50FT.  
18  
18  
18  
14  
100FT.  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
18  
16  
14  
14  
-
Jigsaws  
14  
12  
12  
12  
12  
12  
Circular Saws  
-
Angle Grinders  
Reciprocating Saws  
Routers  
SPECIFICATIONS  
SPECIFICATIONS  
19.2V  
Rotary Tools  
Voltage  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
Speed  
0-2000 RPM (no load)  
0-4400 BPM  
180 ft.lbs.  
Approx. 3-5 Hours  
Ni-Cad  
Impacts Per Minute  
Maximum Torque  
Charging Time  
Battery Type  
15  
16  
 
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
2 YEAR LIMITED HOME USE WARRANTY  
Express and Exclusive Limited Home Use Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI™ portable power tool and no one else  
all parts of the product (except those parts referred to below which are specifically  
excluded from such warranty (see Exclusions)) to be free from defects in materials  
and workmanship for a period of two years from original date of purchase.  
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS:  
Kawasaki™ portable power tool is offered as a home use tool and carries a  
This  
HOME  
USE WARRANTY  
.
This tool is made for home use in the execution of  
COMMERCIAL  
projects and repairs in and around the home. Use of the tool for  
PURPOSES OR ON A JOBSITE  
is not covered under this warranty.  
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
component thereof is modified, altered or used for any commercial purpose or on  
a jobsite. This warranty does not apply to any other product and/or component  
thereof manufactured or distributed by Alltrade, and does not apply to products  
and/or components thereof designed, manufactured and/or assembled by others,  
Exclusions  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
THERE ARE NO WARRANTIES  
for which Alltrade makes no warranties whatsoever.  
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.  
Warranty Performance  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service 1-800-590-3723)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
found to be defective and subject to warranty. Alltrade retains the sole discretion  
to determine whether any item or part is nonconforming and, if so, whether the  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
17  
18  
 
Warranty Disclaimers  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADES AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department toll free at 1-800-590-3723 for general repair information and charges.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASERS SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
19  
20  
 

Ingersoll Rand Heat Pump AF0603M User Manual
Ingersoll Rand Water Pump 650308 X User Manual
ION Turntable PROFILE PRO User Manual
JVC Car Stereo System GET0287 003A User Manual
JVC Electronic Keyboard RD MD5 User Manual
Kettler Bicycle Ergoracer GT User Manual
KitchenAid Refrigerator KBFS25EWMS5 User Manual
Klipsch Speaker Icon X Series User Manual
Konica Minolta Graphics Tablet VI 9i User Manual
Kramer Electronics Home Theater Screen VP 747 User Manual