Kawasaki Cordless Drill 691295 User Manual

COMPONENT  
#691295  
3/8" RIGHT ANGLE ELECTRIC DRILL  
INSTRUCTION MANUAL  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,  
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND  
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO  
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE  
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE  
DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION  
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE  
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE  
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM.  
YOUR FEEDBACK IS VITAL TO US.  
87-1904-60957  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP.,  
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT.  
CONSUMER INQUIRES SHOULD BE DIRECTED TO:  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
1-800-590-3723  
LONG BEACH, CA 90810-1462 USA  
691295 – 3/8" Right Angle Electric Drill_Rev 4/5/07  
Printed in China  
 
WORK AREA  
CAUTION  
indicates a potentially hazardous  
situation which, if not avoided, may result in  
minor or moderate injury.  
Keep your work area clean and well lit.  
areas may cause accidents or injury.  
Cluttered work benches and dark work  
CAUTION  
used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
Do not operate power tools in explosive areas, such as in the presence of  
flammable liquids, gases or dust.  
the dust or fumes.  
Power tools create sparks which may ignite  
NOTE  
provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
Keep bystanders, children and visitors away while operating a power tool.  
Distractions can cause you to lose control.  
IMPORTANT SAFEGUARDS  
ELECTRICAL SAFETY  
Double insulated tools are equipped with a polarized plug (one blade is  
wider than the other.) This plug will fit in a polarized outlet only one way. If  
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,  
contact a qualified electrician to install a polarized outlett. Do not change the  
People with electronic devices, such as pacemakers, should consult their  
physician(s) before using this product. Operation of electrical equipment in  
close proximity to a heart pacemaker could cause interference or failure of  
the pacemaker.  
plug in any way.  
Double insulation  
eliminates the need for the three wire  
WARNING:  
Some dust created by power sanding, sawing, grinding, drilling and  
grounded power cord and grounded power supply system.  
other construction activities contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm.  
Avoid body contact with grounded surfaces such as pipes, radiators, ranges  
and refrigerators  
. There is an increased risk of electric shock if your body is  
Some examples of these chemicals are:  
• Lead from lead-based paints.  
grounded.  
Do not expose power tools to rain or wet conditions.  
tool will increase the risk of electric shock.  
Water entering a power  
Crystalline silica from bricks and cement and other masonry products,  
and arsenic and chromium from chemically-treated lumber.  
Do not abuse the cord. Never use the cord to carry the tool or pull the plug  
from an outlet. Keep the cord away from heat, oil, sharp edges, or moving  
Your risk from these exposures varies, depending on how often you do this type  
of work. To reduce your exposure to these chemicals: work in a well ventilated  
area, and work with approved safety equipment, such as dust masks that are  
specially designed to filter out microscopic particles.  
parts. Replace damaged cords immediately  
. Damaged cords increase the risk  
of electric shock.  
When operating thhe tool outside, use an outdoor extension cord marked W-  
WARNING:  
Handling the power cord on this product may expose you to lead, a  
A” or W. ”  
tric shock.  
These cords are rated for outdoor use and reduce the risk of elec-  
chemical known to the State of California to cause cancer and birth defects or  
other reproductive harm.  
Wash hands after handling.  
Make sure the extension cord bbeing used is in good condition.  
If there are any  
DO NOT  
cut or nicks (no matter how deep) in the insulation,  
use that cord. Also,  
make sure the extension cord is heavy enough to carry the current needed by  
DO NOT  
the saw (see Recommended Sizes Chart).  
use small "around-the-  
house” lamp extension cords. These cords can easily overheat and/or catch fire  
when used with power tools.  
3
4
 
PERSONAL SAFETY  
Maintain tools with care. Keep cutting tools sharp and clean.  
Properly maintained  
tools with a sharp cutting edge are less likely to bind and are easier to control.  
Stay alert, watch what you are doing, and use common sense when operat-  
ing a power tool. Do not use tool while tired or under the influence of drugs,  
Check for misalignment or binding oof moving parts, breakage of parts, and any  
other condition that may affect the tool’s operation. If damaged, have the tool  
alcohol or medication.  
A moment of inattention while operating power tools  
serviced before using.  
Many accidents are caused by poorly maintained tools.  
Use only accessories that are recommended by the manuffacturer for your  
model.  
may result in serious personal injury.  
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.  
Accessories that may be suitable for one tool may create a risk of injury  
when used on another tool.  
Keep your hair, clothing, and gloves away from moving parts.  
jewelry or long hair can be caught in moving parts.  
Loose clothes,  
Avoid accidental starting. Be sure switch is off before plugging in  
. Carrying  
tools with your finger on the switch or plugging in tools that have the switch on invites  
accidents.  
SERVICE  
Tool service must be performed only by qualified repair personnel.  
maintenance by unqualified personnel may result in a risk of injury.  
Service or  
Remove adjusting keys or wrenches before turning the power tool ON.  
A wrench or a key that is left attached to a rotating part of the power tool may  
result in personal injury.  
When servicing a tool, use only identical replacement parts. Follow instructions  
in the Maintenance section of this manual.  
Use of unauthorized parts or failure to  
follow Maintenance Instructions may create a risk of shock or injury.  
Do not overreach. Keep proper footing and balance at all times.  
Proper footing  
and balance enables better control of the power tool in unexpected situations.  
SPECIFIC SAFETY RULES AND/OR SYMBOLS  
Use safety equipment. Always wear eye protection.  
Dust mask, non-skid  
safety shoes, hard hat or hearing protection must be used for appropriate  
conditions.  
Hold tool by insulated gripping surfaces when perform-  
ing an operation where the cutting tool may contact hidden wiring or its own  
cord.  
Contact with a live” wire will also make exposed metal parts of the tool  
TOOL USE AND CARE  
“live” and shock the operator.  
IMPORTANT SAFETY RULES FOR DRILLS  
Use clamps or other practical ways to secure and support the workpiece to a  
stable platform.  
Holding the work by hand or against your body is unstable and  
may lead to loss of control.  
For safety and better control, always use both hands to hold tool.  
and kicks back, having both hands on the drill will make it easier to handle.  
If the bit jams  
Do not force tool. Use the correct tool for your application.  
will do the job better and safer at the rate for which it is designed.  
The correct tool  
Always wear eye protection and an OSHA-approved dust mask when drilling.  
Do not use the tool if the power switch does not turn it ON” or OFF.  
cannot be controlled with the switch is dangerous and must be repaired.  
A tool that  
Never hold the work piece in your hand or against your body.  
Use clamps to anchor  
the work piece to a stable base. Never drill material too small to be secured properly.  
Disconnect the power cord plug from the power source before making any  
adjustments, changing accessories or storing the tool.  
Keep hands and drill cord away from the rotating bit.  
Such preventive safe-  
ty measures reduce the risk of starting the tool accidentally.  
Make sure there are no nails, staples or other foreign objects in the work  
piece  
.
Store idle tools out of reach of chilldren and other untrained persons.  
are dangerous in the hands of untrained users.  
Tools  
5
6
 
FUNCTIONAL DESCRIPTION  
To prevent accidental starting, always disconnect the plug from the power  
source before making any aadjustments or changing accessories.  
8
Never run the drill while carrying it at your side.  
3
If the bit becomes bound in the work piece, release the trigger immediately  
1
and prepare for the tool to kickback toward you.  
Reverse the direction of rota-  
tion, then back out the bit by slowly squeezing the trigger.  
2
Make sure all accessories are rated for the recommended speed of the drill.  
Brushes, grinding wheels and other accessories may fall apart if run at too high  
a speed, sending dangerous debris flying at the operator.  
9
4
Use gloves when changing hot bits and accessories to avoid burns.  
5
6
SYMBOLS  
IMPORTANT:  
Some of the following symbols may be used on your tool. Please  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
7
SYMBOL  
NAME  
EXPLANATION  
Voltage (Potential)  
Current  
Frequency (Cycles per Second)  
Power  
Weight  
Type of Current  
Type of Current  
V
A
Hz  
W
Kg  
Volts  
Amperes  
Hertz  
Watt  
CONTROLS AND COMPONENTS:  
1. Trigger Switch  
2. Lock-On Switch  
3. Direction Control Lever  
4. Comfort Rubber Grip  
5. Motor Housing  
Kilograms  
Alternating Current  
Direct Current  
6. Motor Brush (2)  
7. Double Insulated Power Cord  
8. Chuck  
Alternating or Direct Current Type of Current  
9. Chuck Key  
Earthing Terminal  
Class II Construction  
Minutes  
Grounding Terminal  
Denotes Double Insulation  
Time  
Time  
min  
s
OPERATING INSTRUCTIONS  
Seconds  
Diameter  
Size of Drill Bits,  
Grinding Wheels, etc.  
No-load Rotational Speed  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
Disconnect the power plug from the AC power source  
before any assembly, adjustments, or adding/removiing accessories.  
Following this preventative step reduces the risk of the drill coming on acciden-  
tally and the risk of damage to the workpiece and injury to the operator.  
No load speed  
Revolutions per Minute  
.../min  
1,2,3, …  
Ring Selector Settings  
Speed, Torque or Position Settings  
8
7
 
OPERATING THE ON/OFF SWITCH  
BIT INSERTION  
Unplug the drill. Never change bits  
Squeeze the trigger switch to turn the tool “ON. Release the trigger switch to turn  
the tool “OFF.  
on a live drill.  
When drilling for extended periods, the Lock-On” switch may be used, but do not  
use this switch in situations where the drill is likely to bind or kickback. If kickback  
does occur, the sudden motion of the tool may make it difficult to release the Lock-  
On” switch and turn the drill off.  
• Make sure the bit is undamaged,  
sharp and free from wood or metal  
shavings. Foreign material on the  
bit may keep the chuck from tight-  
ening fully. A loose bit may cause  
injury.  
SPEED CONTROL ADJUSTING SWITCH  
Push the bit into the chuck as far  
as it will go.  
To increase the operating speed of the  
drill, squeeze the trigger switch. To  
decrease the speed, release the trigger  
switch.  
• Make sure the bit is in the center  
of the chuck. If the bit is off-cen-  
ter, it will not be held securely and  
may fly loose during use causing  
serious injury.  
• Insert the chuck key into one of the three chuck holes. Rotate the chuck key  
clockwise to lock the bit in place.  
LOCK-ON SWITCH  
Remove the chuck key.  
DIRECTION CONTROL LEVER  
Always run the drill for one minute before drilling to  
make sure the bit is properly seated.  
the drill before touching the bit.  
If the bit needs to be adjusted, unplug  
The direction control lever changes the  
rotation of the drill chuck. It is located just  
above the trigger switch. ALWAYS turn the  
motor off and let the bit come to a  
complete stop before moving the switch.  
BIT REMOVAL  
Unplug the drill.  
Depress the R” arrow switch on the left  
side of the drill for a forward rotation of the  
bit. Depress the direction switch lever on  
the right of the drill for the bit to rotate in  
reverse.  
• Insert the chuck key into one of  
the three chuck holes. Rotate the  
chuck key counterclockwise to  
unlock the bit.  
Remove the bit.  
Do not change the direction of a moving bit. Make sure the  
bit comes to a complete standstill before moving switch. Changing direction  
while the bit is moving can cause damage to the drill.  
9
10  
 
MAINTENANCE AND CLEANING  
In certain situations, the bit may bind and the drill will  
kickback in the opposite direction.  
This sudden reaction could lead to loss of  
control and possible serious injury. Always be prepared for the possibility of  
kickback, especially when breaking through material to complete a hole.  
Unplug the drill before performing maintenance or cleaning.  
Never immerse tool in liquid. Never let any liquid inside tool housing.  
Clean with a damp cloth and mild soap. Do not use solvents or harsh detergents.  
DRILLING WOOD  
Check brushes periodically. Worn brushes should be replaced by qualified serv-  
ice personnel.  
Always clamp the work piece to a steady base. Never hold in your hand or  
across your legs.  
Keep air vents clean and free from debris. Blocked air vents can lead to over-  
heating.  
Apply pressure in line with the bit. Applying pressure at an angle could cause  
the bit to bind or break.  
Thin materials that may splinter should be drilled with another piece of wood  
placed underneath.  
ACCESSORIES  
Twist bits can be used for wood drilling but will overheat if the flutes are not  
cleared of wood chips periodically.  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may become hazardous when used on  
another tool.  
To prevent splintering when finishing holes, stop drilling just before the hole  
breaks through and complete the hole from the other side.  
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.  
If you must use an extension cord, be suree that the gauge is large enough to carry  
DRILLING MASONRY  
the amount of current necessary for your power tool.  
If not, your tool may experi-  
Always use carbide tip bits for drilling masonry.  
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge  
number, the heavier the cord (see table below).  
Use an even pressure, hard enough to keep the drill biting, but not so hard that  
the bit spins in the hole. Spinning the bit will dull it quickly. Bricks and similar  
soft materials will take less pressure than a hard material like concrete.  
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS  
TOOL CURRENT RATING  
CONDUCTOR SIZE IN A.W.G  
AMPERE  
3-6  
6-8  
8-10  
10-12  
12-16  
16-20  
10FT.  
18  
18  
18  
16  
25FT.  
18  
18  
18  
16  
50FT.  
18  
18  
18  
14  
100FT.  
DRILLING METAL  
18  
16  
14  
14  
-
Use an even pressure, hard enough to keep the drill biting, but not so hard that  
the bit spins in the hole. Spinning the bit will dull it quickly. Soft metals like  
copper, cast iron, brass or aluminum will take less pressure than harder  
materials like steel.  
14  
12  
12  
12  
12  
12  
When drilling harder metals, use lubricating oil on the tip of the bit.  
-
11  
12  
 
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
component thereof is modified or altered. This warranty does not apply to any  
other product and/or component thereof manufactured or distributed by Alltrade,  
and does not apply to products and/or components thereof designed, manufactured  
and/or assembled by others, for which Alltrade makes no warranties whatsoever.  
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON  
THE FACE HEREOF.  
SPECIFICATIONS  
SPECIFICATIONS  
Voltage  
Rated Current  
No-Load Speed  
Chuck Capacity (max.)  
120V  
60 Hz  
3.2 A  
0-1500/min  
10mm (3/8")  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Warranty Performance  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
found to be defective and subject to warranty. Alltrade retains the sole discretion  
to determine whether any item or part is nonconforming and, if so, whether the  
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
Jigsaws  
Circular Saws  
Angle Grinders  
Reciprocating Saws  
Routers  
Rotary Tools  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
3 YEAR LIMITED WARRANTY  
Express and Exclusive Limited Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI™ power tool and no one else all parts  
of the product (except those parts referred to below which are specifically exclud-  
ed from such warranty (see Exclusions)) to be free from defects in materials and  
workmanship for a period of three years from original date of purchase, except that  
such warranty with regard to the battery shall be for a period of two years from  
original date of purchase, unless the tool is used for commercial or rental  
purposes.  
SPECIAL WARRANTY NOTE FOR COMMERCIAL OR RENTAL USE:  
The above  
warranty for this Kawasaki™ power tool, including the battery, shall be effective for  
only 90 days from the original date of purchase if this tool is used for any  
COMMERCIAL OR RENTAL PURPOSE.  
13  
 
Exclusions  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASERS SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADES AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
Warranty Disclaimers  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASERS  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department toll free at 1-800-590-3723 for general repair information and charges.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
15  
16  
 

Jensen Turntable SB6060 User Manual
JVC Car Stereo System GET0697 001A User Manual
JVC CRT Television HV 32P37SUE HV 28P37SUE User Manual
JVC Headphones HA NC80 E User Manual
Keating Of Chicago Griddle Teppanyaki Griddle User Manual
Kenmore Dishwasher 665177 User Manual
Kenmore Dishwasher 3384413A User Manual
Kenwood Car Stereo System B64 1612 00 EN User Manual
KitchenAid Double Oven 122 User Manual
Knoll Stereo Receiver UDR Quad User Manual